Skip to main content
Version: v2.5

Technical

How can I reset the administrator password?

Docker Install:

$ docker exec -ti <container_id> reset-password
New password for default administrator (user-xxxxx):
<new_password>

Kubernetes install (Helm):

$ KUBECONFIG=./kube_config_cluster.yml
$ kubectl --kubeconfig $KUBECONFIG -n cattle-system exec $(kubectl --kubeconfig $KUBECONFIG -n cattle-system get pods -l app=rancher | grep '1/1' | head -1 | awk '{ print $1 }') -- reset-password
New password for default administrator (user-xxxxx):
<new_password>

I deleted/deactivated the last admin, how can I fix it?

Docker Install:

$ docker exec -ti <container_id> ensure-default-admin
New default administrator (user-xxxxx)
New password for default administrator (user-xxxxx):
<new_password>

Kubernetes install (Helm):

$ KUBECONFIG=./kube_config_cluster.yml
$ kubectl --kubeconfig $KUBECONFIG -n cattle-system exec $(kubectl --kubeconfig $KUBECONFIG -n cattle-system get pods -l app=rancher | grep '1/1' | head -1 | awk '{ print $1 }') -- ensure-default-admin
New password for default administrator (user-xxxxx):
<new_password>

How can I enable debug logging?

See Troubleshooting: Logging

My ClusterIP does not respond to ping

ClusterIP is a virtual IP, which will not respond to ping. Best way to test if the ClusterIP is configured correctly, is by using curl to access the IP and port to see if it responds.

Where can I manage Node Templates?

Node Templates can be accessed by opening your account menu (top right) and selecting Node Templates.

Why is my Layer-4 Load Balancer in Pending state?

The Layer-4 Load Balancer is created as type: LoadBalancer. In Kubernetes, this needs a cloud provider or controller that can satisfy these requests, otherwise these will be in Pending state forever. More information can be found on Cloud Providers or Create External Load Balancer

Where is the state of Rancher stored?

  • Docker Install: in the embedded etcd of the rancher/rancher container, located at /var/lib/rancher.
  • Kubernetes install: in the etcd of the RKE cluster created to run Rancher.

How are the supported Docker versions determined?

We follow the validated Docker versions for upstream Kubernetes releases. The validated versions can be found under External Dependencies in the Kubernetes release CHANGELOG.md.

How can I access nodes created by Rancher?

SSH keys to access the nodes created by Rancher can be downloaded via the Nodes view. Choose the node which you want to access and click on the vertical button at the end of the row, and choose Download Keys as shown in the picture below.

Download Keys

Unzip the downloaded zip file, and use the file id_rsa to connect to you host. Be sure to use the correct username (rancher or docker for RancherOS, ubuntu for Ubuntu, ec2-user for Amazon Linux)

$ ssh -i id_rsa user@ip_of_node

How can I automate task X in Rancher?

The UI consists of static files, and works based on responses of the API. That means every action/task that you can execute in the UI, can be automated via the API. There are 2 ways to do this:

  • Visit https://your_rancher_ip/v3 and browse the API options.
  • Capture the API calls when using the UI (Most commonly used for this is Chrome Developer Tools but you can use anything you like)

The IP address of a node changed, how can I recover?

A node is required to have a static IP configured (or a reserved IP via DHCP). If the IP of a node has changed, you will have to remove it from the cluster and readd it. After it is removed, Rancher will update the cluster to the correct state. If the cluster is no longer in Provisioning state, the node is removed from the cluster.

When the IP address of the node changed, Rancher lost connection to the node, so it will be unable to clean the node properly. See Cleaning cluster nodes to clean the node.

When the node is removed from the cluster, and the node is cleaned, you can readd the node to the cluster.

How can I add more arguments/binds/environment variables to Kubernetes components in a Rancher Launched Kubernetes cluster?

You can add more arguments/binds/environment variables via the Config File option in Cluster Options. For more information, see the Extra Args, Extra Binds, and Extra Environment Variables in the RKE documentation or browse the Example Cluster.ymls.

How do I check if my certificate chain is valid?

Use the openssl verify command to validate your certificate chain:

Note: Configure SSL_CERT_DIR and SSL_CERT_FILE to a dummy location to make sure the OS installed certificates are not used when verifying manually.

SSL_CERT_DIR=/dummy SSL_CERT_FILE=/dummy openssl verify -CAfile ca.pem rancher.yourdomain.com.pem
rancher.yourdomain.com.pem: OK

If you receive the error unable to get local issuer certificate, the chain is incomplete. This usually means that there is an intermediate CA certificate that issued your server certificate. If you already have this certificate, you can use it in the verification of the certificate like shown below:

SSL_CERT_DIR=/dummy SSL_CERT_FILE=/dummy openssl verify -CAfile ca.pem -untrusted intermediate.pem rancher.yourdomain.com.pem
rancher.yourdomain.com.pem: OK

If you have successfully verified your certificate chain, you should include needed intermediate CA certificates in the server certificate to complete the certificate chain for any connection made to Rancher (for example, by the Rancher agent). The order of the certificates in the server certificate file should be first the server certificate itself (contents of rancher.yourdomain.com.pem), followed by intermediate CA certificate(s) (contents of intermediate.pem).

-----BEGIN CERTIFICATE-----
%YOUR_CERTIFICATE%
-----END CERTIFICATE-----
-----BEGIN CERTIFICATE-----
%YOUR_INTERMEDIATE_CERTIFICATE%
-----END CERTIFICATE-----

If you still get errors during verification, you can retrieve the subject and the issuer of the server certificate using the following command:

openssl x509 -noout -subject -issuer -in rancher.yourdomain.com.pem
subject= /C=GB/ST=England/O=Alice Ltd/CN=rancher.yourdomain.com
issuer= /C=GB/ST=England/O=Alice Ltd/CN=Alice Intermediate CA

How do I check Common Name and Subject Alternative Names in my server certificate?

Although technically an entry in Subject Alternative Names is required, having the hostname in both Common Name and as entry in Subject Alternative Names gives you maximum compatibility with older browser/applications.

Check Common Name:

openssl x509 -noout -subject -in cert.pem
subject= /CN=rancher.my.org

Check Subject Alternative Names:

openssl x509 -noout -in cert.pem -text | grep DNS
DNS:rancher.my.org

Why does it take 5+ minutes for a pod to be rescheduled when a node has failed?

This is due to a combination of the following default Kubernetes settings:

  • kubelet
    • node-status-update-frequency: Specifies how often kubelet posts node status to master (default 10s)
  • kube-controller-manager
    • node-monitor-period: The period for syncing NodeStatus in NodeController (default 5s)
    • node-monitor-grace-period: Amount of time which we allow running Node to be unresponsive before marking it unhealthy (default 40s)
    • pod-eviction-timeout: The grace period for deleting pods on failed nodes (default 5m0s)

See Kubernetes: kubelet and Kubernetes: kube-controller-manager for more information on these settings.

In Kubernetes v1.13, the TaintBasedEvictions feature is enabled by default. See Kubernetes: Taint based Evictions for more information.

  • kube-apiserver (Kubernetes v1.13 and up)
    • default-not-ready-toleration-seconds: Indicates the tolerationSeconds of the toleration for notReady:NoExecute that is added by default to every pod that does not already have such a toleration.
    • default-unreachable-toleration-seconds: Indicates the tolerationSeconds of the toleration for unreachable:NoExecute that is added by default to every pod that does not already have such a toleration.

Can I use keyboard shortcuts in the UI?

Yes, most parts of the UI can be reached using keyboard shortcuts. For an overview of the available shortcuts, press ? anywhere in the UI.

What does Unknown schema for type: errors followed by something like catalog.cattle.io.operation mean when trying to modify an App?

This error occurs when Kubernetes can not find the CRD mentioned. The vast majority of the time these are a result of missing RBAC permissions. Try with an admin user and if this works, add permissions for the resource mentioned by the error (ie. Get, List, Patch as needed).